2
https://toys.shopping4all.uk/2018/10/17/hobby-components-4x4x4-64-led-cube-kit-available-in-various-colours-blue/


buy now

£10.99



LED light cubes are a hugely popular and fun project and with this kit you will have all the parts to build your very own. Building on the popular 8x8x8 cube kit (HCKITS0022), we decided to create an easy to build through-hole version for those of you who are better suited to this kind of soldering. The kit includes all the components necessary to build the Arduino compatible driver base board and 64 3mm LEDS to build a 4 x 4 x 4 cube.

You can view a working cube by searching Hobby Components on youTube.



What you get in the kit:

4x4x4 Cube PCB

16 x 100ohm Resistors

4 x 220ohm Resistors

1 x 10K Resistor

1 x Tact Switch

4 x White 5mm LEDs

3 x 100nF Capacitors

2x 20pF Capacitors

1x ATMega328 IC

1x 16MHz Crystal

1x ULN2003 IC



One of the following:

64 x 3mm BLUE LEDs (HCKITS0041)

64 x 3mm GREEN LEDs (HCKITS0042)

64 x 3mm RED LEDs (HCKITS0043)

64 x 3mm WHITE LEDs (HCKITS0044)



Plus: A USB to serial interface cable that can be used to power and reprogram the completed cube.



Please note that some familiarity in soldering is recommended to construct this kit. A soldering iron, solder and some tools will also be required.





A full build guide is available on our blog.LED light cubes are a hugely popular and fun project and with this kit you will have all the parts to build your very own. Building on the popular 8x8x8 cube kit (HCKITS0022), we decided to create an easy to build through-hole version for those of you who are better suited to this kind of soldering. The kit includes all the components necessary to build the Arduino compatible driver base board and 64 3mm LEDS to build a 4 x 4 x 4 cube.
A full build guide is available on our blog.
The kit also comes preloaded with several demo patterns so once constructed simply connect the cable and your cube will immediately jump into life. But the fun doesn't have to stop there. If you like to tinker the kit is compatible with the Arduino development environment and we have also created an Arduino library which is available for download from the software section of our support forum. This library makes it as easy as possible to create your own LED cube sketches and add your own patterns.
Latest Comments